Charging dSLR Camera Batteries from USB

The portable power and portable solar charger world is divided into two camps: USB & 12V. USB for the small stuff, and 12V for the big stuff. The smaller solar USB chargers are designed to keep phones & iPods charged. The larger 12V solar products being used to charge just about everything up to & including laptops, medical equipment, and homes. But what if you want to use a USB source to charge a dSLR camera battery? Can you charge a 7.4V battery from a 5V source?

Digital Cameras & Solar Chargers

If you have a small point-and-shoot camera, chances are the camera uses a small 3.6V or 3.7V lithium battery pack. There are great, because they can often charge inside the camera when plugged into a USB source (ie for image download), or via small USB chargers like the LenMar Clip.

 dSLR camera batteries do not have it so easy. At 7.2V or 7.4V, their battery chargers needed to provide something in the range of 8.4V, which means using a 12V system to get the voltage they need. And 12V solar kits are usually larger and more expensive than their smaller USB cousins.

Now there is a solution...

For years, I have been recommending universal chargers like the Ansmann Vario, Ansmann Vario Pro, and the Lenmar BCUNI2. These chargers do a fine job charging 3.6/3.7V, 7.2/7.4V, and AA batteries from a wall socket or 12V car socket (including 12V solar panels & battery packs). One charger to do it all. As noted in other articles I've written on the subject, the only camera battery I have come across so far that does not fit these universal chargers is the Canon LP-E6 (battery terminal contacts are too close together).
When a client needed to charge their Canon, Nikon, Olympus, Panasonic, or other dSLR camera models while out in the bush, I would direct them to 12V systems, and one of these universal chargers.

But now, a new universal charger is available that allows these larger camera batteries to be charged from a USB source. The advantage is being able to pack smaller, lighter USB solar kits & storage batteries to keep the cameras charged...

PIXO C-USB Universal Charger from PIXO of Germany
Features...
Automatically selects correct voltage & polarity
Charge rate up to 800mA
USB2 & USB3 compatible
Adjusts to a wide variety of camera battery sizes & shapes
Deep discharge battery revival mode

Brief Review...
I've had the chance to use the PIXO C-USB charger for a little over 3 months now, and so far it has performed very well. The USB input port & included cable are very robust. The charger chassis is solid, including the sliding door which holds the battery in place. The springs which help to hold the battery firmly in place are strong. The terminal blades are rather important, and the PIXO's are plenty tough - would be quite difficult to bend.
The charging performance itself has been good. It clearly indicates charging modes (charging/end), and it doesn't take much longer than a wall charger would to bring a camera battery up from 50% depletion. It is slightly slower when charging a 7V camera battery due to the voltage transform (I used a Sony NP-F550 as a test).

Conclusion...
I have no problem recommending the PIXO C-USB charger. Best of all, I am no longer bound to 12V options for dSLR users. I can now specify USB-based solar & battery packages like the Voltaic FUSE 6W or Nepal 6 Kit to people who want to take their dSLR cameras into the wild.

Please feel free to contact me with any questions regarding this charger.

Personal Power for Nepal Trekkers

I just helped Mick Bromley of Wilderness Trekking head off to Nepal on his latest excursion with two sets of portable solar power systems. One is designed to keep a videographer's equipment charged while he chronicles Mick's legendary attention to every aspect of the Nepal experience. The second is for Mick himself, so that he is able to keep his own camera, tablet, and communications gear charged. His system will also come in handy when his clients need a power boost for their own cameras.

Here is an overview of the systems...

For the Videographer : SunLINQ 5 Solar Panel with Brunton Sustain2 Storage Battery & LP-E6 DC Charger

The SunLINQ panel folds down small & light, and features CIGS efficient thin film cells that excel in the high-UV exposure at altitude, and at the higher ambient temperatures in the lower regions of the country. The Brunton Sustain is a ruggedized lithium pack that stores 75 Watt-Hours of power... enough for 5 full charges on a Canon dSLR battery, so there is plenty of back-up in case of several days of inclement weather.

The balance is in the logistics. With the panel deployed for several hours each day during stops, or at camp, the power produced will easily offset the power being drawn for camera battery charging & video editing/archiving. The power budget was designed around the need for 2-3 Canon LP-E6 charges per day. Because it is never a good idea to drain a lithium battery below 50% on a regular basis, the videographer will be bringing several battery packs that he will top-off at various times during the day & at camp at night.
Lastly, I do not like the DC input connector provided with the Brunton Sustain2. Too fragile, and introduces a mysterious voltage drop that makes it incompatible with slightly lower voltage panels like the Powerfilm series. So, I sent one of the Modern Outpost Solar Input Cables... a tougher & much longer cable that makes camp set-up options easier.

For Mick : Voltaic Fuse 10W with Ansmann Vario Pro Charger

This is a fantastic solar kit. 10W of premium Bosch crystalline solar cells in a rugged encapsulation, set into a rugged case that can carry a laptop & tablet at the same time. The case features webbing on the back, so strapping it to the outside of a backpack is a simple task. Having all the solar charging gear in one place instead of being spread around with wiring has its advantages too. Mick simply opens the case and connects his camera charger, tablet, phone, radio, or virtually anything else he might need.
The panels produce the power he needs each day, and just in case he runs into bad weather, he has 60 Watt-Hours of power stored in the Fuse10W's internal V60 battery pack.

While laptops, tablets, and USB devices can all be connected directly to the Fuse10's internal battery pack, getting the power from the Fuse10 kit into camera batteries is done via an Ansmann Vario Pro universal charger. Plug the charger into the 12V socket on the Fuse10, snap your camera battery into the cradle, and the charger selects the correct voltage, polarity, and begins charging. It even shows you the state-of-charge so you can better manage your power usage.
Simple. Elegant. Functional. Reliable.

Mick's Client Pick :  Fuse 4W with Pixo Charger

Mick and I talked about an option for his clients, should they want to bring a charger of their own. Something simple to use, simple to pack, rugged, and able to charge virtually any type of camera, phone, iPod, etc. The Voltaic Fuse 4W fits perfectly. 4 Watts of German-made Bosch panels in a small pack that straps to a backpack. Inside is room for small gadgets, & the 4000mAHr solar storage battery, capable of charging or powering everything USB including tablets.

The German Pixo charger is universal, adapting to all 3.6/3.7V camera batteries, plus all 7.2/7.4V dSLR & camcorder batteries (a neat trick not seen in other USB chargers).
This kit is able to offset approx 75% of a dSLR battery every day, or a mix of devices adding up to same.

Well, that's it. Trekking with electronics made easy.
Should you need any further details, or want help with the math concerning your own trekking power needs, please do not hesitate to contact me.

Best!