Digital Cameras & Solar Chargers
If you have a small point-and-shoot camera, chances are the camera uses a small 3.6V or 3.7V lithium battery pack. There are great, because they can often charge inside the camera when plugged into a USB source (ie for image download), or via small USB chargers like the LenMar Clip.
dSLR camera batteries do not have it so easy. At 7.2V or 7.4V, their battery chargers needed to provide something in the range of 8.4V, which means using a 12V system to get the voltage they need. And 12V solar kits are usually larger and more expensive than their smaller USB cousins.
Now there is a solution...
For years, I have been recommending universal chargers like the Ansmann Vario, Ansmann Vario Pro, and the Lenmar BCUNI2. These chargers do a fine job charging 3.6/3.7V, 7.2/7.4V, and AA batteries from a wall socket or 12V car socket (including 12V solar panels & battery packs). One charger to do it all. As noted in other articles I've written on the subject, the only camera battery I have come across so far that does not fit these universal chargers is the Canon LP-E6 (battery terminal contacts are too close together).
When a client needed to charge their Canon, Nikon, Olympus, Panasonic, or other dSLR camera models while out in the bush, I would direct them to 12V systems, and one of these universal chargers.
But now, a new universal charger is available that allows these larger camera batteries to be charged from a USB source. The advantage is being able to pack smaller, lighter USB solar kits & storage batteries to keep the cameras charged...
Features...
Automatically selects correct voltage & polarity
Charge rate up to 800mA
USB2 & USB3 compatible
Adjusts to a wide variety of camera battery sizes & shapes
Deep discharge battery revival mode
Brief Review...
I've had the chance to use the PIXO C-USB charger for a little over 3 months now, and so far it has performed very well. The USB input port & included cable are very robust. The charger chassis is solid, including the sliding door which holds the battery in place. The springs which help to hold the battery firmly in place are strong. The terminal blades are rather important, and the PIXO's are plenty tough - would be quite difficult to bend.
The charging performance itself has been good. It clearly indicates charging modes (charging/end), and it doesn't take much longer than a wall charger would to bring a camera battery up from 50% depletion. It is slightly slower when charging a 7V camera battery due to the voltage transform (I used a Sony NP-F550 as a test).
I have no problem recommending the PIXO C-USB charger. Best of all, I am no longer bound to 12V options for dSLR users. I can now specify USB-based solar & battery packages like the Voltaic FUSE 6W or Nepal 6 Kit to people who want to take their dSLR cameras into the wild.
Please feel free to contact me with any questions regarding this charger.
